Replacement Locks For Patio Doors at Lowe's
Replacing the lock on your patio door is a simple way to enhance your home's security. However it is important to install the lock correctly and perform regular maintenance are essential.
In order to successfully replace a patio door lock, it is vital to know what kind of lock your existing one is. You can determine the type by observing the size of the screw hole and end face plate type.
Identifying Your Lock's Existing Lock
If you're considering buying new hardware for your locks, it's essential that you understand the differences between various kinds of locks. This will allow you to choose a lock that is suitable for your home and ensure its safety and security.
The most popular type of lock is the cylinder lock also known as pin and tumbler locks. This style of lock uses a combination of top pins, bottom pins and springs to keep the key hole and plug in place. Cylinder locks are available in different sizes. It is essential to know the length and width of the cylinder that you currently have before buying a new one.
To measure the width, loosen the screws that hold the cylinder in place and then carefully remove it. Then, take a measurement of the distance between the outside edge of the cylinder and its inner end and record the measurement in millimeters. Compare this measurement to the measurements of the lock you intend to purchase. This will ensure that the new lock will fit into the door's lock hole.
Another method to determine the proper size of your existing lock is to test it with the help of a key. If the key slides easily into the cylinder, then it is the same width as the rekey kit you need. If the key is unable to slide into the cylinder the cylinder may have a different keyway and therefore, it is not rekeyable so that it accepts the key of that brand.
It is always recommended to read the manufacturer's instructions that come with a rekey kit for each lock, since each lock has its own unique set of installation requirements. It is crucial to test the new lock thoroughly following installation to ensure it operates properly and offers you maximum security. It is also important to be aware of any additional features that your new lock may have, as they can affect how easy it is to operate.
Measure the Width
A broken patio door lock could cause serious security issues. It's essential to regularly inspect your locks and replace them as necessary. This ensures that they're safe and working correctly, and could aid in preventing issues like keys that aren't locked properly or latches that are loose. visit the following internet page offers new locks that can give your home the security it requires regardless of whether your locks are damaged or worn out.
It is crucial to take measurements of your patio door prior to buying an additional lock. This will allow you to determine the size of lock you should purchase and reduce the risk of buying a lock that does not fit. There are two measurements you need to do this: the backset and the case depth. The former refers to the distance from the edge of the lock's face to the centre of the round hole through which the spindle of the handle passes through and the other refers to the depth of the lock body that is visible from the outside of the door.
It's also important to think about the way you will use your doors when deciding what kind of lock you require. If your sliding doors swing horizontally, you'll require top and bottom tab locks that engages with the strikeplate, stopping it from being lifted or forcefully opened. If your patio doors are vertically open, you'll need to choose mortise latches that have a spring loaded hook latch for extra security.
When determining the dimensions of your current lock, it's essential to note the exact location of the screw holes. Some mortise lock screws are round, while others are square. You'll be able to determine where the keyway is. Some locks have a vertical keyway, while others are 45-degree angled. Take a photograph of the lock using a digital camera to make sure you receive the correct replacement.
Once you've made the measurements now is the time to start shopping for your new patio door lock. There are a variety of high-quality products online with a variety of branded options with advanced security features to protect your home. The choice of a lock is an investment in the security of your home It is therefore essential to shop around and read reviews prior to buying. Make sure to maintain your locks regularly to prevent dirt and other debris from that could cause problems for your doors.
Be aware of the screw holes
Patio doors are an essential element of your home's security. They must be inspected for signs of wear to ensure they function properly. Over time, your locks and spindle that connects the interior and exterior handles will need to be replaced. A durable lock not only prevents unwanted entry, but can also improve security, energy efficiency and security.
There are a variety of ways to narrow your search for a new lock, if you don't have the exact type. To begin, identify the type of keyway that is employed. Aluminum patio doors are often fitted with mortise locks with a rectangular cutout and E2126 or E2079 locks are installed in a recess on the frame. Uploading a photograph of the lock with your digital camera can help determine what type it is.
You can also determine the type of lock by looking at the screw holes. The majority of sliding patio door locks have screw holes that align with the latch keeper that is mounted on the side jamb, however they're not always the same. Some screws are longer than others, or have a different threaded finish. Some screws also have washers or a hex nuts attached to them, which may affect how they fit into the lock's hasp.
Once you've identified the kind of lock your home has, you can begin planning to replace it. First, you'll need to clean the lock with a damp cloth or brush to get rid of any debris or dirt that might be impeding its operation. After the lock has been cleaned, you can use a silicone-based grease to keep it in good shape and quiet.
It's a great idea replace your screws with longer ones. This will allow you to gain more grip and also install the lock more easily. After you've done this it's important to check the handle to see how the latch works with the lock.
If the hasp does not engage, you might need to install a washer or hex-nut behind it to help it catch more of the door's lip. You could even add a shim to one side of the lock keeper on the jamb to see if it can help.
Check the Lock Snib
The snib, or mechanism for locking, is located in the handle of the door. The snib can be turned off and on to open or close your patio doors, and is the first thing you need to look at if your locks aren't functioning properly. Also, you can check the keepers (located on the top and bottom of the door frame) for any looseness or misalignment that could cause them to shear. Verify that the snib is properly seated and that the lock hasn't been blocked or stuck in any other way.
The most popular patio door locks are steel mortise latches that secure your sliding glass doors in place. They're inserted into the door frame and come in a variety of designs, making them an effective security measure. Some are designed to hold keys while others have an oval-shaped cutout, making it easy to lock and unlock.
Another popular option is a step-on lock that has a thumb-screw design that securely keeps your sliding doors in place without having you to turn the knob or use the key. These locks are often used on older patio doors, but can be a great option to secure wood or vinyl-framed sliding doors too.
When you're looking at your current patio door lock, make note of the kind and size of the screw holes it uses to mount the escutcheon plate and lock body. This will allow you to select a lock with the correct screw holes. It's an excellent idea to check the strike plate to ensure that it's aligned with the lock body and is securely secured.
If you have Jason Windows boltlock slider doors from 2000-2009 make sure that the keeper screws remain in place and are not missing or loose. The screws hold the snib in a partially opened "vent" position to allow airflow, while also promoting security. They are essential for preventing the lock from breaking. All locks must be inspected and cleaned regularly to avoid dirt, dust, corrosion or other debris from hindering their operation.
If your snib is broken it is possible to simply replace the entire strike plate and snib assemblage. If your snib simply requires to be aligned, you can correct it by removing the strikeplate with a putty blade and backing out the adjustment screws (located below and above the screw). Then, you'll have to move the strikeplate up or down until the tongue of engagement is aligned with the Milgard logo.